1. Walk around and lift top of track for tension (see tips on track tension).

Important Safety Issue

1. Pull plastic covers off of top hub bearing and check for tightness. If with a wrench they are loose remove and put some lock tight on and retighten. The factory has replace the ½ inch long grade 5 bolts with 3/4 inch long 1/4 x 20 grade 8, This is only on 373000 ATV tracks not on 374001 ATV and UTV tracks, Sometimes you will find a bolt broken. If this happens these will come out with a small pick or chisel. All of my customers that have purchased these will have the new bolts mailed to them. Any tracks sold after Dec 15th will have this upgrade done by atvtracks.net

2. Check lug nuts for tightness every 100 miles

3. ALWAYS have the 17 mm swivel 3/8 drive socket with a 8 inch extension and ratchet on your ATV as you will not be able to remove or retighten the lug nuts without this.