There’s nothing a dirt bike rider dreads more than the last ride of the season. Are you tired of waiting for the snow to melt so you can hit the trails? Go far, explore more. Introducing the Camso DTS 129 snow bike system for Husaberg motorcycles. This track kit is designed specifically for Husaberg FS models with 570 CC engines, produced from 2010 through 2011. This dirt-to-snow conversion system features a bolt-on track and front sled to convert your dirt bike to a snow-chewing machine.
The Camso DTS 129 conversion system provides a single-rail suspension to maintain classic dirt bike handling in snow. The rubber tracks are specifically designed for use on snow bikes. Each track is built with a pre-bled braking system to ensure optimal braking. The Camso DTS 129 conversion system is designed to keep your bike’s original balance while riding in snow. Stop dreading the first snows. You’ll never look at winter the same way again.
- Cutting-edge track design Provide versatility with grip and control on all snow conditions.
- Single rail suspension Maintain similar dirt bike behavior you love on dirt but in the snow.
- Suspension CAM integration Maintain suspension behavior you love on dirt.
- Polymer brake shield enclosing Isolate from snow contact to provide full brake efficiency in any conditions.
- Resized brake rotor Better even brake pad pressure allowing consistent braking in all snow conditions.
- Aluminum side panel Improve durability and increase panel rigidity.
At ATVTracks.net, we specialize in track systems. We offer the best dirt bike track kits available. We offer the best parts and expertise for any application. Give us a call at (866) 243-8359 to find out how the Camso DTS 129 can turn your bike into a snow-shredding beast. Go far. Explore more.
Go ahead. Keep your Bike out
Are you tired of putting up your dirt bike when the snow flies? There�s a track kit for you. The DTS-129 track system from Camso will convert your bike from a two-wheeled dirt machine to a snow beast. The track system replaces your rear wheel with an integrated dual-chain tensioner, pre-bled braking system, and covered with an aluminum side panel to reinforce structural integrity. A 12.5� wide track creates maximum flotation on snow. The front wheel is replaced with a ski featuring a replaceable side keel for better turns. This system mimics dirt path handling on the snow and can even be used on hard pack trails.
The ultimate all-season upgrade
Get reliable winter mobility with your Dirt Bike by equipping it with tracks.
No other track system give you this much
Easily interchangeable between bikes
Buying a new bike? Want to take another bike out in the winter? This track system easily bolts onto most dirt bikes. Maximize the ride in all seasons.
Quick and easy to install
With a few basic tools you can get the recurrent installation done in an hour or less. Nonetheless, we recommend that you have an authorized dealer carry out the first installation.
Built to last
Constructed with a solid tubular steel frame, an aluminum side panel for rigidity, and an aluminum strut, this track kit is built to last. Even the braking system is enclosed in a polymer shield to prolong brake efficiency in any conditions.
Simple high-performance design
Camso systems are designed with ease and durability in mind to minimize maintenance and simplify your life. They're tough and reliable to give you superior, exhilarating performance.
A Bike for All Seasons
- Track system specifically designed for dirt bikes
- Track designed for optimal flotation and grip in any snow conditions
- Suspension designed to mimic dirt track action on snow
- Front ski designed for stable and predictable handling
- Fast, easy swap from wheels to tracks and back again
|DIMENSIONS||CAMSO DTS 129|
|Estimated dry weight| Front ski||20 lb / 9 kg|
|Overal length x width| Front ski||43 in x 12 in (1100 mm x 305 mm)|
|Estimated dry weight| Rear suspension||135 lb /61 kg|
|Overall length x width| Rear suspension||69 in x 15 in (1750 mm x 385 mm)|
|Main frame||Tubular steel frame|
|Side panel||All aluminium reinforced with square panel guard|
|Strut rod||Aluminium rod with compliant rubber mount|
|Chain slider||Primary and secondary drive nylon chain guide|
|Brake type||Radial mount double piston caliper, pre-bled RH hand master cylinder, revised rotor and anti-rattle brake pad clip|
|Chain case||Sealed Regina 520 (continuous)|
|Drive chain||Sealed Regina 520 (master link)|
|Drive shaft sprocket||17 tooth w/ splined axle|
|Upper chain case sprocket||15 tooth w/ splined axle|
|Lower chain case sprocket||19 tooth w/ splined axle|
|Track driver||7 tooth x 2,86 double internal drive|
|Chain tensioner||Oil bath bearing dual chain tensioner. Slide and pivot|
|Rail||Aluminium reinforced polymer single beam suspension|
|Shock and spring||Single torsion spring and gaz shock absorber|
|Travel||12.0 in (30.5 cm)|
|Track width/length/height||12.5 in x 129 in x 2.5 in|
|Ski type||Camso multiple keel snow bike ski|
|Ski upright||Polymer compliant upright with pivot point integrated at the keel level|
|Wear bar||Inner 60� STUD BOY� shaper bar carbide / Outside sharpened high-strength steel|
|Front and rear fitment||CNC machined aluminium bushing and plates|
|Cargo storage||Integrated storage zone with anchor point|
|Installation time||< 2 hr|
|Subsequent||< 1 hr|